Mayo Clinic Laboratories specimen packaging & transport guide
Mayo Clinic Laboratories publishes a United States shipping guide and specimen preparation pages for clients. The points below summarize that public documentation. Package each specimen in a labeled primary receptacle, a leak-proof secondary bag with absorbent, and a rigid outer container, with the requisition kept separate.
Independent guide · Not affiliated with Mayo Clinic Laboratories · Updated 2026-10-31
What Mayo Clinic Laboratories's public documentation says
- Specimens are placed in Mayo Clinic Laboratories' color-coded, temperature-specific bags; if a bag other than Mayo's is used, it must be leakproof with absorbent material. (source)
- Specimens must be separated by temperature, and each temperature group is packed in its own insulated (Styrofoam) container inside the shipping box. (source)
- For frozen shipments, pellet dry ice is preferred; block dry ice is reduced to 1–2 inch pieces, with about two inches of dry ice in the bottom and specimens surrounded by dry ice. (source)
- Cool packs for refrigerated shipping must be frozen at least 24 hours at −10 to −20 °C; frozen cool packs are not acceptable for specimens that require frozen shipping. (source)
- Dry ice for frozen shipments must be purchased locally. (source)
Lab instructions change. Check the linked pages and the specific test's directory entry before you package.
Official Mayo Clinic Laboratories resources
- Mayo Clinic Laboratories — United States Shipping Guide
- Mayo Clinic Laboratories — Specimen Collection and Preparation

General packaging steps
- Primary receptacle. Use the container the test requires, check the expiration date, tighten caps fully, and label with at least two patient identifiers plus collection date and time.
- Requisition. Match the order to the label exactly and place it in the bag's separate rear pocket so it stays dry.
- Secondary bag. Seal specimens in a leak-proof biohazard bag with enough absorbent for all the liquid; keep fragile tubes from touching.
- Temperature. One temperature per bag; follow the lab's ranges for ambient, refrigerated and frozen.
- Outer container. Use a rigid, insulated container; mark UN3373 for Category B shipments and follow dry-ice rules when used.
- Handoff. Count bags with the courier, note the time and temperatures, and keep your copy of the manifest.


If your practice is in the Phoenix metro or the Austin area and you send specimens to a national lab's local patient service center, processing site or drop location, a local courier can carry the packaged specimens across town on your schedule. Package exactly as the lab instructs — the courier does not repackage specimens.

For the full walkthrough — including dry ice, 95 kPa bags, UN3373 vs. Category A, chain of custody and stability — read our complete specimen packaging and transport guide, and see the CDC, DOT, IATA and OSHA resources.
Other national reference laboratories
Frequently asked questions
- How do I package a specimen for Mayo Clinic Laboratories?
- Start with Mayo Clinic Laboratories's own published instructions, summarized with sources on this page, and its test directory for test-specific rules. As general guidance (not Mayo Clinic Laboratories-specific), most labs also expect a tightly capped, labeled primary receptacle, a leak-proof bag with absorbent, the requisition kept separate from the specimen, and temperatures separated.
- Is Progressive Couriers affiliated with Mayo Clinic Laboratories?
- No. Progressive Couriers is an independent courier and is not affiliated with, endorsed by, or an approved courier for Mayo Clinic Laboratories. This guide is informational.
- Where does Progressive Couriers deliver specimens?
- In the Phoenix metro and Arizona, and in the Austin, TX area. We transport ordinary clinical specimens, including Category B and exempt specimens, and do not accept Category A infectious substances.
Lab specimen transport requirements: packaging, temperature & chain of custody →
OSHA bloodborne pathogens & specimen transport requirements →
Not medical, legal or regulatory advice. This guide is general information last reviewed 2026-10-31. Requirements change; always follow the receiving laboratory's current test directory and instructions, and current DOT, IATA and OSHA rules. Illustrations are original diagrams for general education.
Questions? 602-499-2672