BioReference Laboratories specimen packaging & transport guide

BioReference Laboratories publishes test-specific collection and transport requirements in its online test directory. We could not verify a general packaging page directly, so this guide gives general best practice and links to BioReference's official directory. Package each specimen in a labeled primary receptacle, a leak-proof secondary bag with absorbent, and a rigid outer container, with the requisition kept separate.

Independent guide · Not affiliated with BioReference Laboratories · Updated 2026-10-31

Lab-specific requirements

We could not verify BioReference Laboratories-specific packaging details from public documentation, so we do not list any here. Use the general steps below and confirm container, temperature, stability and pickup requirements directly with BioReference Laboratories using the official link(s) below.

Official BioReference Laboratories resources

Diagram of triple packaging for lab specimens: leak-proof primary tube, secondary biohazard bag with absorbent pad, rigid outer box marked UN3373
Triple packaging: primary receptacle, leak-proof secondary bag with absorbent, and rigid outer packaging.

General packaging steps

  1. Primary receptacle. Use the container the test requires, check the expiration date, tighten caps fully, and label with at least two patient identifiers plus collection date and time.
  2. Requisition. Match the order to the label exactly and place it in the bag's separate rear pocket so it stays dry.
  3. Secondary bag. Seal specimens in a leak-proof biohazard bag with enough absorbent for all the liquid; keep fragile tubes from touching.
  4. Temperature. One temperature per bag; follow the lab's ranges for ambient, refrigerated and frozen.
  5. Outer container. Use a rigid, insulated container; mark UN3373 for Category B shipments and follow dry-ice rules when used.
  6. Handoff. Count bags with the courier, note the time and temperatures, and keep your copy of the manifest.
Two-pocket specimen transport bag with tubes in the sealed front pouch and folded test requisition in the rear pocket with barcode showing
Step 2: specimens in the sealed front pouch, requisition folded in the rear pocket so paperwork stays dry.
Three specimen bags separated by temperature: ambient room temperature, refrigerated and frozen
Step 5: never mix temperatures in one bag. Each lab publishes its own temperature ranges.

If your practice is in the Phoenix metro or the Austin area and you send specimens to a national lab's local patient service center, processing site or drop location, a local courier can carry the packaged specimens across town on your schedule. Package exactly as the lab instructs — the courier does not repackage specimens.

Courier pickup checklist for lab specimens: caps tight, requisition in rear pocket, one patient per bag, temperatures separated
Step 10: a quick pickup checklist before the specimen leaves your office.

For the full walkthrough — including dry ice, 95 kPa bags, UN3373 vs. Category A, chain of custody and stability — read our complete specimen packaging and transport guide, and see the CDC, DOT, IATA and OSHA resources.

Frequently asked questions

How do I package a specimen for BioReference Laboratories?
Use triple packaging (labeled, tightly capped primary receptacle; leak-proof secondary bag with absorbent; rigid outer container), keep the requisition in the bag's separate pocket, separate temperatures, and confirm test-specific requirements with BioReference Laboratories.
Is Progressive Couriers affiliated with BioReference Laboratories?
No. Progressive Couriers is an independent courier and is not affiliated with, endorsed by, or an approved courier for BioReference Laboratories. This guide is informational.
Where does Progressive Couriers deliver specimens?
In the Phoenix metro and Arizona, and in the Austin, TX area. We transport ordinary clinical specimens, including Category B and exempt specimens, and do not accept Category A infectious substances.

Lab specimen transport requirements: packaging, temperature & chain of custody →

OSHA bloodborne pathogens & specimen transport requirements →

Not medical, legal or regulatory advice. This guide is general information last reviewed 2026-10-31. Requirements change; always follow the receiving laboratory's current test directory and instructions, and current DOT, IATA and OSHA rules. Illustrations are original diagrams for general education.

Questions? 602-499-2672