Labcorp specimen packaging & transport guide
com. Here is what that documentation says about packaging and transport, with links to the source pages. Package each specimen in a labeled primary receptacle, a leak-proof secondary bag with absorbent, and a rigid outer container, with the requisition kept separate.
Independent guide · Not affiliated with Labcorp · Updated 2026-10-31
What Labcorp's public documentation says
- Labcorp defines storage and shipping temperatures as room temperature 10.1–40.0 °C, refrigerated 1.0–10.0 °C and frozen −1.0 to −80.0 °C. (source)
- Labcorp advises tightening container lids carefully to avoid leakage and transporting the specimen at the temperature indicated in the test requirements, and checking that collection supplies are not expired. (source)
- For outdoor lockboxes, Labcorp suggests adding a frozen icepack in warmer weather; icepacks should be frozen solid (four hours or longer in a freezer) before each use. Labcorp also offers an insulated lockbox for extreme temperatures. (source)
- Frozen specimens should be held in a freezer at 0 °C to −20 °C unless a test requires −70 °C (dry ice); tubes are labeled with permanent marker, and a separate frozen sample is submitted for each test requiring one. (source)
- Labcorp's multi-temperature guidance states frozen, refrigerated and room-temperature samples cannot travel in the same bag and are matched on arrival using copies of the order with the same control number. (source)
Lab instructions change. Check the linked pages and the specific test's directory entry before you package.
Official Labcorp resources
- Labcorp — Introduction to Specimen Collection
- Labcorp — Blood Specimens: Chemistry and Hematology
- Labcorp — Guidelines for submitting multi-temperature samples (PDF)

General packaging steps
- Primary receptacle. Use the container the test requires, check the expiration date, tighten caps fully, and label with at least two patient identifiers plus collection date and time.
- Requisition. Match the order to the label exactly and place it in the bag's separate rear pocket so it stays dry.
- Secondary bag. Seal specimens in a leak-proof biohazard bag with enough absorbent for all the liquid; keep fragile tubes from touching.
- Temperature. One temperature per bag; follow the lab's ranges for ambient, refrigerated and frozen.
- Outer container. Use a rigid, insulated container; mark UN3373 for Category B shipments and follow dry-ice rules when used.
- Handoff. Count bags with the courier, note the time and temperatures, and keep your copy of the manifest.


If your practice is in the Phoenix metro or the Austin area and you send specimens to a national lab's local patient service center, processing site or drop location, a local courier can carry the packaged specimens across town on your schedule. Package exactly as the lab instructs — the courier does not repackage specimens.

For the full walkthrough — including dry ice, 95 kPa bags, UN3373 vs. Category A, chain of custody and stability — read our complete specimen packaging and transport guide, and see the CDC, DOT, IATA and OSHA resources.
Other national reference laboratories
Frequently asked questions
- How do I package a specimen for Labcorp?
- Start with Labcorp's own published instructions, summarized with sources on this page, and its test directory for test-specific rules. As general guidance (not Labcorp-specific), most labs also expect a tightly capped, labeled primary receptacle, a leak-proof bag with absorbent, the requisition kept separate from the specimen, and temperatures separated.
- Is Progressive Couriers affiliated with Labcorp?
- No. Progressive Couriers is an independent courier and is not affiliated with, endorsed by, or an approved courier for Labcorp. This guide is informational.
- Where does Progressive Couriers deliver specimens?
- In the Phoenix metro and Arizona, and in the Austin, TX area. We transport ordinary clinical specimens, including Category B and exempt specimens, and do not accept Category A infectious substances.
Lab specimen transport requirements: packaging, temperature & chain of custody →
OSHA bloodborne pathogens & specimen transport requirements →
Not medical, legal or regulatory advice. This guide is general information last reviewed 2026-10-31. Requirements change; always follow the receiving laboratory's current test directory and instructions, and current DOT, IATA and OSHA rules. Illustrations are original diagrams for general education.
Questions? 602-499-2672